IP To Analog NTSC PAL RF Modulator
- Model Number:32 IP streams
- Type:Other
- Place of Origin:China
- Brand Name:Other
- Use:CATV
- Warranty Time:1 year
- Network:None
SNK6587 is a high-density IP to analog RF platform that carry 32 non-adjacent channels in a 2U box. Browser based user interface facilitate system setup and maintenance efficiency. This outstanding modulator system consume much less power than other competitors, eventually reduce operating cost and extend life cycle.
n System provides 4 GE input ports for both MPTS and SPTS video streams
n Compact 2RU design with 5 cooling fans and dustproof screen
n Receive up to 32 IP streams and output up to 32 channels in NTSC or PAL standard
n Easy configuration and software upgrade by built-in Web UI
n Optional function on teletext and overlay
n Support BISS decryption as an option
GE INPUT | |
Input Connector | 4x RJ45 |
Transport Protocol | UDP, RTP |
Addressing | Unicast, Multicast |
MPEG Transport | SPTS, MPTS |
TS DECODING | |
Video Resolutions | Up to 1080P |
Video Form | MPEG1/2/4; H.264; H.265; AVS; AVS+; VC1 |
Audio Form | MPEG-1 Layer I/II/III; WMA, AAC,AC3 |
MAX decoding stream | 32 channels |
Additional capabilities | Teletext; BISS decrypt, optional |
Aspect Ratio Control | 4:3(Letter & Box); 16:9 |
RF OUTPUT | |
Connector | F female connector |
Number of RF channels | Max 32, Fully agile modulated channels |
Supported Standard | NTSC, PAL BG/DI/DK |
STD, HRC and IRC | Supported |
Output Frequency | 48 ~ 860 MHz |
Out-band Rejection | ≥ 60dB |
Flatness | -2dB per carrier |
Return Loss | 12 dB (min) |
Differential Gain | ≤ 5% |
Group Delay Response | ≤ 100nS |
2K Factor | ≤ 2% |
Output Level | ≥ 53dBmV combined* |
Adjust Range | 20dB Per 32CHs |
10dB Per CH | |
Audio Output Format | MONO |
Audio Level Adjust Range | 0 ~ 100 % |
RF Test Point | -20 dB Relative to output |
GENERAL | |
Management | NMS |
Language | English, Spanish |
Power Supply | AC 90 ~ 264 V |
Consumption | <240 W |
Weight | 8.5 KG |
Dimension | 484*435*89 (MM) |
*NOTICE: The analog output level should greater than the digital output level at 5dB, when these two signals are combined together.
